Small branding that guests can actually read
You don't need to wrap a robot to make it yours. A logo decal, a name plate or a card on the tray can do most of the work, provided people can take it in while the robot glides past.
Four kinds of small branding
Each one is quick to fit and simple to change.
Decals
Cut vinyl logos or shapes on a flat panel. Removable adhesive lets you change them or take them off cleanly.
Tray signage
A small sign or edge strip on the tray: the venue name, or a short note for guests collecting an order.
Name plates
Giving the robot a name helps guests and staff refer to it. A plate on the body or head is usually enough.
Menu and promo cards
A holder for a specials card or event notice. Easy to swap, but only useful while it's current.
Reading at walking pace
A passing guest gets a second or two. Design for that.
- One idea per surfaceA logo, a name or a short line is enough. A paragraph on a moving robot won't be read.
- Big, plain letteringSimple sans-serif type at a generous size, with space around it, reads best from across a room.
- Strong contrastDark on light or light on dark. Mid-tone on mid-tone disappears under dim restaurant lighting.
- Matte rather than glossGlossy finishes catch downlights and windows, which can wash out the message from some angles.
- Eye level for the audienceSeated diners see the tray and upper body. People standing in a lobby see the head and top panel.
- Leave the screen aloneStickers or cards over the display block the controls that staff and guests use.
Practical points
Fix anything that could move
Card holders and signs should be secured well enough that they don't rattle loose or drop onto a tray when the robot brakes or turns. Avoid anything that sticks out beyond the robot's outline, because the robot doesn't know it's there.
QR codes need a pause
A code on a moving robot is hard to scan. If you add one, put it where the robot stops, at the table or collection point, and make it large enough to scan without leaning in.
Keep cards current and clean
An expired offer looks worse than no offer. Make one person responsible for swapping cards, and use wipeable sleeves or laminated cards in food areas.
Choose materials that last
Printed vinyl with a laminate over it resists scuffs and wiping far better than paper labels, which curl, peel and look shabby quickly.
Test placement while it moves
Before fixing anything permanently, hold it on with low-tack tape (well away from sensors) and watch a few runs. A spot that looks fine on a parked robot can be hidden by a full tray or a guest's hand.
Make clear it's a robot
A name and friendly wording are fine, but guests should still know to ask staff about allergens, bookings or anything the robot can't deal with.
Keep the set consistent
Small pieces add up, so settle on one layout.
Using the same colours, typeface and placement on every robot in a venue makes them look deliberate rather than decorated. A one-page diagram showing where each decal and card belongs helps staff replace them in the right spot.
When small pieces aren't enough, our sister guide explains designing and fitting a full vinyl wrap.
RobotX publishes this guide; for information about service robots themselves, visit robotx.au.